L&M Hardeners & Toppings

$28.99

L&M™ QUARTZPLATE FF™ is ready-mixed, scientifically graded, 98% pure quartz silica aggregate, dry shake hardener. It has been specifically engineered for early application to concrete floors that are designed to conform to a specific floor flatness designation. 55lb Bag APPROXIMATE COVERAGE Heavy duty 1.0 lb-1.5 lb/ft2 (4.9-7.3 kg/m2)

$34.99

L&M TRAP ROCK™ is a combination of 100% graded trap rock and portland cement. It is a polyhedral shaped, abrasion resistant, chemically inert, non-absorbent aggregate produced from igneous rock. *MINIMUM PURCHASE QTY 96 UNITS - SPECIAL ORDER 8-12 WEEK LEAD*  55lb Bag APPROXIMATE COVERAGE Heavy duty 1.0 lb-1.5 lb/ft2 (4.9-7.3 kg/m2)

$62.99

EMERYPLATE FF™ is a high strength dry shake for industrial concrete floors requiring additional abrasion and chemical resistance EMERYPLATE FF consists of 100% pure, scientifically graded polyhedral shaped isostructures of emery/corundum and aluminum oxide for hardness, as well as iron oxide for toughness. 50lb Bag APPROXIMATE COVERAGE Heavy ...

$96.99

L&M™ EMERYTOP 400™ is an abrasion resistant, heavy duty floor topping. This flowable, natural emery aggregate floor topping produces a long-lasting and resilient floor. EmeryTop 400 provides excellent abrasion and impact resistance to very severe concrete floor conditions. APPROXIMATE COVERAGE Nominal Thickness Approximate Coverage Per 5...

$110.99

L&M™ CHEM HARD™ chemically reacts with soft free lime and calcium carbonate compounds in concrete to densify and create,chemically resistant surfaces.   APPROXIMATE COVERAGE Typical Application Rate 300 ft2/gal (7.3 m2/L) Two coats recommended.

$185.99

L&M™ SEAL HARD™ is a proprietary, colorless, environmentally safe chemical solution that increases the wear surface strength of concrete floors subjected to pedestrian and vehicle traffic. penetrates concrete surfaces to seal, dustproof, densify and harden them. Floors last longer, cost less to maintain, are safe to use, and resist dusting f...

$323.99

L&M LION HARD™ is a low VOC, environmentally friendly lithium silicate concrete floor densifier, hardener, and sealer. This product penetrates bare concrete surfaces and transforms them into permanently dust free floors that get better with age. APPROXIMATE COVERAGE Typical Application Rates: Coverage dependent upon surface texture and po...

$2,048.67

L&M Quartzplate FF is a ready-mixed, scientifically graded, 98% pure quartz silica aggregate, dry shake hardener. It has been specifically engineered for early application to concrete floors designed to conform to a specific floor flatness designation. Lead times for full and half pallet quantities may vary. To check the current lead time, p...

$2,240.63

L&M Chem Hard chemically reacts with soft free lime and calcium carbonate compounds in concrete to densify and create, chemically resistant surfaces.   Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer service team by phone or email us at proservices@flooringmarket.com. APPRO...

$3,504.23

L&M Seal Hard is a proprietary, colorless, environmentally safe chemical solution that increases the wear surface strength of concrete floors subjected to pedestrian and vehicle traffic. Penetrates concrete surfaces to seal, dustproof, density, and harden them. Floors last longer, cost less to maintain, are safe to use, and resist dusting fo...

$3,638.19

Emeryplate FF is a high-strength dry shake for industrial concrete floors requiring additional abrasion and chemical resistance. Emeryplate FF consists of 100% pure, scientifically graded polyhedral-shaped isostructures of emery/corundum and aluminum oxide for hardness, as well as iron oxide for toughness. Lead times for full and half pallet qua...

$4,154.67

L&M Trap Rock is a combination of 100% graded trap rock and portland cement. It is a polyhedral-shaped, abrasion-resistant, chemically inert, non-absorbent aggregate produced from igneous rock. *MINIMUM PURCHASE QTY 96 UNITS - SPECIAL ORDER 8-12 WEEK LEAD*  55 lb Bag APPROXIMATE COVERAGE Heavy duty 1.0 lb-1.5 lb/ft2 (4.9-7.3 kg/m2)

$4,379.00

L&M Chem Hard chemically reacts with soft free lime and calcium carbonate compounds in concrete to densify and create, chemically resistant surfaces.   Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer service team by phone or email us at proservices@flooringmarket.com. APPRO...

$4,966.67

L&M Emerytop 400 is an abrasion-resistant, heavy-duty floor topping. This flowable, natural emery aggregate floor topping produces a long-lasting and resilient floor. EmeryTop 400 provides excellent abrasion and impact resistance to severe concrete floor conditions. Lead times for full and half pallet quantities may vary. To check the curren...

$5,802.83

L&M Lion Hard is a low VOC, environmentally friendly lithium silicate concrete floor densifier, hardener, and sealer. This product penetrates bare concrete surfaces and transforms them into permanently dust-free floors that improve with age. Lead times for full and half pallet quantities may vary. To check the current lead time, please conta...

$6,836.00

L&M Seal Hard is a proprietary, colorless, environmentally safe chemical solution that increases the wear surface strength of concrete floors subjected to pedestrian and vehicle traffic. Penetrates concrete surfaces to seal, dustproof, density, and harden them. Floors last longer, cost less to maintain, are safe to use, and resist dusting fo...

$11,305.50

L&M Lion Hard is a low VOC, environmentally friendly lithium silicate concrete floor densifier, hardener, and sealer. This product penetrates bare concrete surfaces and transforms them into permanently dust-free floors that improve with age. Lead times for full and half pallet quantities may vary. To check the current lead time, please conta...