Laticrete Sale

$6,914.00

Aquapel is a new generation, 100% reactive, waterborne silane-siloxane sealer. This clear, penetrating, breathable water repellent is ideal for use on interior and exterior, above grade, traffic concrete. L&M Aquapel penetrates concrete surfaces and chemically bonds directly with the substrate, resulting in a surface that is highly resistant...

$3,544.34

Aquapel is a new generation, 100% reactive, waterborne silane-siloxane sealer. This clear, penetrating, breathable water repellent is ideal for use on interior and exterior, above grade, traffic concrete. L&M Aquapel penetrates concrete surfaces and chemically bonds directly with the substrate, resulting in a surface that is highly resistant...

$9,468.00

L&M Aquapel Plus is a sealer designed for increased long-term protection on porous concrete, elevated structural traffic-bearing concrete slabs, and normal concrete with severe exposure to salt and water. Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer service team by phone...

$4,857.83

L&M Aquapel Plus is a sealer designed for increased long-term protection on porous concrete, elevated structural traffic-bearing concrete slabs, and normal concrete with severe exposure to salt and water. Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer service team by phone...

$319.99

L&M AQUAPEL PLUS™ is a sealer designed for increased long-term protection on porous concrete, elevated structural traffic bearing concrete slabs, and on normal concrete with severe exposure to salt and water. Additional Product Information View Product Data Sheet View Material Safety Data Sheet   APPROXIMATE COVERAGE Cinder Block,Bri...

$4,379.00

L&M Chem Hard chemically reacts with soft free lime and calcium carbonate compounds in concrete to densify and create, chemically resistant surfaces.   Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer service team by phone or email us at proservices@flooringmarket.com. APPRO...

$2,240.63

L&M Chem Hard chemically reacts with soft free lime and calcium carbonate compounds in concrete to densify and create, chemically resistant surfaces.   Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer service team by phone or email us at proservices@flooringmarket.com. APPRO...

$2,396.78

L&M Crystex is a ready-mixed, high-strength, highly fluid, controlled expansion grout with superior dynamic load stability. L&M Crystex contains a balanced blend of washed and graded aggregates, portland cement, plasticizing agents, and a proprietary shrinkage compensating system, which controls positive expansion in all directions.  55 ...

$2,792.50

L&M Cure W is a low VOC, ready-to-use, non-residual concrete curing compound. It is a water-based clear sprayable liquid that offers residual-free performance. L&M Cure W is odor-free and is ideal for use in non-vented areas where odor-free products are essential, such as retrofit construction, tunnels, and chimneys. L&M CURE can be ...

$1,424.71

L&M Cure W is a low VOC, ready-to-use, non-residual concrete curing compound. It is a water-based clear sprayable liquid that offers residual-free performance. L&M Cure W is odor-free and is ideal for use in non-vented areas where odor-free products are essential, such as retrofit construction, tunnels, and chimneys. L&M CURE can be ...

$4,241.67

 W2 - WHITE PIGMENTED  L&M Cure W2 is a VOC-compliant, ready-to-use, membrane-forming, emulsified wax concrete curing agent that cures the concrete by forming a barrier against moisture loss without staining concrete surfaces. It is a sprayable liquid that offers good water retention performance. L&M Cure W2 is a transparent membrane cur...

$2,170.00

 W2 - WHITE PIGMENTED  L&M Cure W2 is a VOC-compliant, ready-to-use, membrane-forming, emulsified wax concrete curing agent that cures the concrete by forming a barrier against moisture loss without staining concrete surfaces. It is a sprayable liquid that offers good water retention performance. L&M Cure W2 is a transparent membrane cur...

$953.99

 W2 - WHITE PIGMENTED  L&M™ CURE W2™ is a VOC-compliant, ready-to-use, membrane forming, emulsified wax concrete curing agent that cures the concrete by forming a barrier against moisture loss without staining concrete surfaces. It is a sprayable liquid that offers good water retention performance. L&M CURE W is a clear membrane curing c...

$61.99

L&M CURE is a low VOC, ready to use, non-residual concrete curing compound. It is a water-based clear sprayable liquid that offers residual free performance. L&M CURE is odor-free and is ideal for use in non-vented areas where odor-free products are essential, such as retrofit construction, tunnels, and chimneys. L&M CURE can be easi...

$4,477.00

L&M Debond is a non-staining, low VOC, concrete form release for application to all types of concrete forms, but especially for use in demanding pre-stress and precast applications. Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer service team by phone or email us at proserv...

$116.99

DEBOND GOLD is a non-staining, low VOC, concrete form release for application to all types of concrete forms, but especially for use in demanding pre-stress and precast applications. Additional Product Information View Product Data Sheet View Material Safety Data Sheet (MSDS) View Health Product Declaration (HPD) APPROXIMATE COVERAGE Pre-...

$4,592.20

Debond Gold is a non-staining, low VOC, concrete form release for application to all types of concrete forms, but especially for use in demanding pre-stress and precast applications. Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer service team by phone or email us at proservice...

$2,350.43

Debond Gold is a non-staining, low VOC, concrete form release for application to all types of concrete forms, but especially for use in demanding pre-stress and precast applications. Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer service team by phone or email us at proservice...

$2,291.03

L&M Debond is a non-staining, low VOC, concrete form release for application to all types of concrete forms, but especially for use in demanding pre-stress and precast applications. Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer service team by phone or email us at proserv...

$197.99

L&M DRESS & SEAL 30™ is the highest solids version of our popular L&M DRESS & SEAL products. L&M DRESS & SEAL 30 is a ready to use, acrylic copolymer that cures, seals, and dustproofs concrete.   APPROXIMATE COVERAGE First coat, curing 300-400 ft2/gal (7.4-9.8 m2/L) Second coat, sealing 400-600 ft2/gal (9.8-14.7 m2/...

$6,196.50

L&M Dress & Seal WB 25 formulation is a water-based, low VOC, 25% solids acrylic copolymer solution that cures, seals, and dustproof concrete.   Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer service team by phone or email us at proservices@flooringmarket.com.   APPROX...

$3,175.34

L&M Dress & Seal WB 25 formulation is a water-based, low VOC, 25% solids acrylic copolymer solution that cures, seals, and dustproof concrete.   Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer service team by phone or email us at proservices@flooringmarket.com.   APPROX...

$6,895.50

Dress & Seal WB 30 formulation is a water-based, low VOC, high solids acrylic copolymer solution that cures, seals, and dustproof concrete. The tough film locks in moisture, curing the concrete for maximum hardness. This clear, fast-drying, sprayable liquid is effective on both interior and exterior surfaces. This product adheres well to con...

$3,534.83

Dress & Seal WB 30 formulation is a water-based, low VOC, high solids acrylic copolymer solution that cures, seals, and dustproof concrete. The tough film locks in moisture, curing the concrete for maximum hardness. This clear, fast-drying, sprayable liquid is effective on both interior and exterior surfaces. This product adheres well to con...

$187.99

DRESS & SEAL WB 30 formulation is a water-based, low VOC, high solids acrylic copolymer solution that cures, seals and dustproofs concrete. The tough film locks in moisture, curing the concrete for maximum hardness. This clear, fast drying, sprayable liquid is effective on both interior and exterior surfaces. This product adheres well to con...

$4,708.50

L&M Dress & Seal WB formulations are water-based, low VOC, acrylic copolymer solutions that cure, seal, and dustproof concrete without yellowing. The tough film locks in moisture, curing the concrete for maximum hardness. These clear, fast-drying, sprayable liquids are equally effective on interior and exterior surfaces. Lead times for f...

$2,410.09

L&M Dress & Seal WB formulations are water-based, low VOC, acrylic copolymer solutions that cure, seal, and dustproof concrete without yellowing. The tough film locks in moisture, curing the concrete for maximum hardness. These clear, fast-drying, sprayable liquids are equally effective on interior and exterior surfaces. Lead times for f...

$120.99

L&M™ DRESS & SEAL WB™ formulations are water-based, low VOC, acrylic copolymer solutions that cure, seal and dustproof concrete without yellowing. The tough film locks in moisture, curing the concrete for maximum hardness. These clear, fast drying, sprayable liquids are equally effective on interior as well as exterior surfaces.   APPROX...

$3,179.22

L&M Duracrete is a single-component, polymer-reinforced, high-strength, cement-based patching and resurfacing mortar. L&M Duracrete is designed to repair, slope, and level structurally sound interior and exterior concrete surfaces that are pitted, worn, scaled, or spalled. Lead times for full and half pallet quantities may vary. To check...

$47.99

L&M™ DURACRETE™ is a single component, polymer-reinforced, high-strength, cement-based patching and resurfacing mortar. L&M DURACRETE is designed to repair, slope, and level structurally sound interior and exterior concrete surfaces that are pitted, worn, scaled or spalled.   APPROXIMATE COVERAGE Nominal Thickness Approximate Coverage...

$1,836.00

L&M Duragrout is a ready-mixed, non-shrink, non-metallic, flowable, high-strength structural grout. Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer service team by phone or email us at proservices@flooringmarket.com. 50 lb Bag  APPROXIMATE COVERAGE One bag yields approxi...

$21.31

L&M DURAGROUT™ is a ready-mixed, non-shrink, non-metallic, flowable, high-strength structural grout. 50lb Bag  APPROXIMATE COVERAGE One bag yields approximately 0.4 ft3 (12.5 L)

$6,411.00

L&M E-CON is a concentrated, odorless, water-based polymer liquid that, when placed on fresh concrete, helps control the evaporation rate and extend workability. L&M E-CON is ideal for achieving superior quality flatwork in challenging conditions such as high and low temperatures, low humidity, high winds, and direct sunlight. Lead times...

$3,285.66

L&M E-CON is a concentrated, odorless, water-based polymer liquid that, when placed on fresh concrete, helps control the evaporation rate and extend workability. L&M E-CON is ideal for achieving superior quality flatwork in challenging conditions such as high and low temperatures, low humidity, high winds, and direct sunlight. Lead times...

$172.99

L&M E-CON™ is a concentrated, odorless, water-based polymer liquid that, when placed on fresh concrete, helps to control the rate of evaporation and extend workability. L&M E-CON is ideal for achieving superior quality flatwork in challenging conditions such as high and low temperatures, low humidity, high winds, and direct sunlight.   A...

$3,935.50

E-Z Strip is a low VOC, non-staining, ready-to-use concrete form release agent.   Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer service team by phone or email us at proservices@flooringmarket.com.   APPROXIMATE COVERAGE Steel, plastic, fiberglass 600 ft2/gal (14.7 m2/L) ...

$2,012.54

E-Z Strip is a low VOC, non-staining, ready-to-use concrete form release agent.   Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer service team by phone or email us at proservices@flooringmarket.com.   APPROXIMATE COVERAGE Steel, plastic, fiberglass 600 ft2/gal (14.7 m2/L) ...

$3,638.19

Emeryplate FF is a high-strength dry shake for industrial concrete floors requiring additional abrasion and chemical resistance. Emeryplate FF consists of 100% pure, scientifically graded polyhedral-shaped isostructures of emery/corundum and aluminum oxide for hardness, as well as iron oxide for toughness. Lead times for full and half pallet qua...

$62.99

EMERYPLATE FF™ is a high strength dry shake for industrial concrete floors requiring additional abrasion and chemical resistance EMERYPLATE FF consists of 100% pure, scientifically graded polyhedral shaped isostructures of emery/corundum and aluminum oxide for hardness, as well as iron oxide for toughness. 50lb Bag APPROXIMATE COVERAGE Heavy ...

$4,966.67

L&M Emerytop 400 is an abrasion-resistant, heavy-duty floor topping. This flowable, natural emery aggregate floor topping produces a long-lasting and resilient floor. EmeryTop 400 provides excellent abrasion and impact resistance to severe concrete floor conditions. Lead times for full and half pallet quantities may vary. To check the curren...

$4,956.25

L&M Epogrout 758 is a three-component, flowable, epoxy-based grout that produces high-performance strength and chemical inertness. L&M Epogrout 758 is scientifically formulated with a high aggregate-to-resin ratio to provide high strength while allowing easy flowable placement. Lead times for full and half pallet quantities may vary. To ...

$2,537.50

L&M Epogrout 758 is a three-component, flowable, epoxy-based grout that produces high-performance strength and chemical inertness. L&M Epogrout 758 is scientifically formulated with a high aggregate-to-resin ratio to provide high strength while allowing easy flowable placement. Lead times for full and half pallet quantities may vary. To ...

$7,186.00

L&M Everbond is a versatile acrylic polymer emulsion that can be used either as a bonding adhesive or as an admixture that enhances portland cement-based mixes, giving these mixes improved flexural, tensile and bond strength. Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer ...

$3,684.23

L&M Everbond is a versatile acrylic polymer emulsion that can be used either as a bonding adhesive or as an admixture that enhances portland cement-based mixes, giving these mixes improved flexural, tensile and bond strength. Lead times for full and half pallet quantities may vary. To check the current lead time, please contact our customer ...

$196.99

L&M™ EVERBOND™ is a versatile acrylic polymer emulsion that can be used either as a bonding adhesive or as an admixture that enhances portland cement-based mixes, giving these mixes improved flexural, tensile and bond strength.   APPROXIMATE COVERAGE Roughened concrete 200-300 ft2/gal (4.9-7.4 m2/L) Plaster or smooth concrete 300-400 ft...

$6,798.00

L&M FGS Concrete Conditioner is a proprietary concrete cleaner and conditioner designed for ongoing maintenance of hardened polished concrete surfaces. This product is highly concentrated and contains state-of-the-art wetting and emulsifying agents.   Lead times for full and half pallet quantities may vary. To check the current lead time, pl...

$3,484.69

L&M FGS Concrete Conditioner is a proprietary concrete cleaner and conditioner designed for ongoing maintenance of hardened polished concrete surfaces. This product is highly concentrated and contains state-of-the-art wetting and emulsifying agents.   Lead times for full and half pallet quantities may vary. To check the current lead time, pl...

$184.99

L&M FGS CONCRETE CONDITIONER™ is a proprietary concrete cleaner and conditioner designed for on-going maintenance of hardened polished concrete surfaces